WPT-1 NDT Dye Penetrant Inspection Materials
Quick drying, quick indication
High sensibility
Non-poison, harmless
Solvent remove
Features:
L Sensitivity reach level 2 and is relatively high in comparison with product of same level. Bright color of penetration. Neat development. High contrast.
L High speed penetration, and development. Save your time. Removable with liquid and water. Save your cost. Wash off development with unpressurized water. Save your labour.
L No poisonous and harmful smell. Reduce pollution of working environment.
L One body cap. Imported valve. Good feeling in using and good distribution.
Application:
It can be widely used in chemical industry, shipping industry, power industry, aviation industry, engineering, metallurgical industry, engineering, metallurgical industry, automobile, petrol industry, railway, etc.
Packing:
L Aerosol can(500ml): 6cans/set
L 18L liter can(bulk packing)
Technic parameter:
Usuage:
Clean the workpiece surface with Remover.
Spray Penetrant on the workpiece surface and keep wet of 5-10 minutes.
Clean Penetrant on the workpiece surface with Remover.
Shake Developer until well-distributed, then spray it from 150~300mm.
Flaws will be revealed.
Remove developer with Remover.
| |
Penetrant |
Remover |
Developer |
| Appearance |
Dark-red liquid |
Colorless transparent liquid |
White suspension |
| Specific graviy |
0.86±0.01 |
0.83±0.01 |
0.81±0.02 |
| Corrosive Properties(g/ml) |
No evidence of corrosion |
| Flash pint / '' C |
25 |
25 |
25 |
| Washabilty |
Easy to wash |
| Sensitivity |
Level 2 |
To be used with WPT-1 penetrant
|
| Stability |
Qualified |
| Viscosity/mm 2 /s |
2.2±0.3 |
- |
- |
| Re-dispersing property |
- |
- |
Easy to disperse |
Audited Supplier 
){kind=link}
){kind=link}